Description
IntegraRack IR-15 BallastRack™ Solar Module Racking System (Single Frame)
The IR-15 is the fastest and easiest ground mounting system available, and allows for modules of any size to be racked at a fixed 15° for optimal year-round energy production in regions near the equator. This system can be mounted almost anywhere with its four available mounting options, and is strong enough to withstand wind speeds of up to 200 miles per hour. The IR-15 is also the lowest cost per kW option on the market, with only one IR-15 Frame needed per solar module after starting the row, and no pouring of concrete footings required. The minimal and modular design allows for good airflow behind the solar panels to optimize efficiency and avoid energy heat loss common with plastic bin type products.
See how fast this product can be installed: (Video) Ten Panels Installed In 100 Minutes
*Single frame can be used to start a new row of panels or add one panel to an existing row.
*This product cannot be used with other BallastRack models unless in different rows.
*15° Angle is rated for higher wind loads and is ideal for regions near the equator.
– Fast Assembly & Install
- 2 minute assembly per IR-15 Frame
- Installation as fast as 10 minutes per module
- No earth augers, no concrete, and no post ponding required
- Only one main frame component is required between each solar module to complete entire ground mount system
– Universal Mounting
Four Mounting Options (Click links to view more information):
- IR EarthBallast™ Kit – Uses fast setting epoxy to adhere geotextile material to IR-15 Frames and earth fill over for a fast ballasted system
- IR AnchorSpike™ Kit – Mount IR-15 Frames by clamping the base tubes around specially designed anchor spikes that provide easy off the ground leveling
- Concrete Lag Bolt Kit – Bolt the IR-15 Frames directly to any concrete surface (concrete pad, footings, or patios)
- Base Ballasting – Hold IR-15 Frames in place using flat water tanks or concrete curb stops
– Most Cost Effective Ground Mounted Solar System
- One of the lowest cost per kW ground mount racking systems on the market
- Traditional ground mount solar racking systems take 6x longer to install and are much more labor intensive
- Capable of racking modules of up to 700 Watts
– High-Strength Engineered & Tested
- Extensively engineered and outdoor lab tested with simulated real world wind and snow load conditions
- Build entirely from aircraft grade 6061 T6 aluminum with stainless steel mounting brackets
- Capable of withstanding up to wind loads of up to 200 mph and snow loads of up to 100 pounds per sq ft (click manufacturers resources link below for detailed Datasheets)
- Strong, simple “U” shaped design provides amazing strength
– Unprecedented Versatility
- Fixed 15° angle for optimal year-round energy production and excellent snow shedding capabilities
- Up to 2 feet of ground clearance
- Adjustable solar module height
- Portrait solar module mounting for easy wiring
- The Base Tubes of each IR-15 Frame are designed to clamp around and bite into IR AnchorSpikes or concrete stakes for easy leveling and increased hold down strength.
Manufacturer Resources
Click the link below for additional Product Info, Instructional Videos, Warranty Coverage, Datasheets, Testing & Engineering for the IR-15.
Additional Components Required For Some Mounting Configurations
1 Inch EMT/Conduit Pipe (required for certain mounting options)
- 1 inch EMT adds racking strength and helps with positioning for module spacing.
- 10 foot long Conduit Pipes can be sourced locally (Home Depot, Lowes, Electrical Hardware Store, Etc.).
Are you a Licensed Installer?
Please contact us to become an Authorized Dealer/Installer to receive additional discounts for the products we offer.
