Description
IntegraRack IR-45 BallastRack™ Solar Module Racking System (Single Frame)
The IR-45 is the fastest and easiest ground mounting system available and allows for modules of any size to be racked at a fixed 45° for optimal year-round energy production. This system can be mounted almost anywhere with its four available mounting options and is strong enough to withstand wind speeds of up to 120 miles per hour. The IR-45 is also the lowest cost per kW option on the market, with only one IR-45 Frame needed per solar module after starting the row, and no pouring of concrete footings required. The minimal and modular design allows for good airflow behind the solar panels to optimize efficiency and avoid energy heat loss common with plastic bin type products.
*HIGH DEMAND PRODUCT (Expect 2-3 week lead time)
*The IR-45 is not interchangeable with other IntegraRack BallastRack products unless used in different rows
See how fast this product can be installed: (Video) Ten Panels Installed In 100 Minutes
How many do you need?
(number of solar panels) + (number of rows) = (frames needed)
– Fast Assembly & Install
- 2 minute assembly per IR-45 Frame
- Installation as fast as 10 minutes per module
- No earth augers, no concrete, and no post ponding required
- Only one main frame component is required between each solar module to complete entire ground mount system
– Universal Mounting
Four Mounting Options (Click links to view more information):
- IR EarthBallast™ Kit – Uses fast setting epoxy to adhere geotextile material to IR-45 Frames and earth fill over for a fast ballasted system
- IR AnchorSpike™ Kit – Mount IR-45 Frames by clamping the base tubes around specially designed anchor spikes that provide easy off the ground leveling
- Concrete Lag Bolt Kit – Bolt the IR-45 Frames directly to any concrete surface (concrete pad, footings, or patios)
- Base Ballasting – Hold IR-45 Frames in place using flat water tanks or concrete curb stops
– Most Cost Effective Ground Mounted Solar System
- One of the lowest cost per kW ground mount racking systems on the market
- Traditional ground mount solar racking systems take 6x longer to install and are much more labor intensive
- Capable of racking modules of up to 700 Watts
– High-Strength Engineered & Tested
- Extensively engineered and outdoor lab tested with simulated real world wind and snow load conditions
- Build entirely from aircraft grade 6061 T6 aluminum with stainless steel mounting brackets
- Capable of withstanding up to wind loads of up to 120 mph and snow loads of up to 100 pounds per sq ft (click manufacturers resources link below for detailed Datasheets)
- Strong, simple “U” shaped design provides amazing strength
– Unprecedented Versatility
- Fixed 45° angle for optimal year-round energy production and excellent snow shedding capabilities
- Up to 2 feet of ground clearance
- Adjustable solar module height
- Portrait solar module mounting for easy wiring
– Maximum Efficiency
- With no horizontal rails needed for mounting, there is nothing to block light from reaching the back of the panels giving extra production for bifacial solar panels.
- Other racking products can block airflow to the back of the panels and reduce output due to heat loss.
Manufacturer Resources
Click the link below for additional Product Info, Instructional Videos, Warranty Coverage, Datasheets, Testing & Engineering for the IR-45.
Additional Components Required For Some Mounting Configurations
1 Inch EMT/Conduit Pipe (required for certain mounting options)
- 1 inch EMT adds racking strength and helps with positioning for module spacing.
- 10 foot long Conduit Pipes can be sourced locally (Home Depot, Lowes, Electrical Hardware Store, Etc.).
Are you a Licensed Installer?
Please contact us to become an Authorized Dealer/Installer to receive additional discounts for the products we offer.
