Description
The IntegraRack FC Series Universal L-Foot Bracket is designed to be used for a variety of asphalt roof applications, but it’s best feature is it’s ability to be used with our IR-T1 No Penetration Tile Roof Bracket. With four mounting holes on the bottom foot, this bracket can be mounted onto the IR-T1 in any direction for landscape or portrait module mounting, and can be held down with two bolts to keep it from rotating.
Rail-Less
This bracket works with most all rail based systems, or with our own IR-F1 Rail-Less Module Flange Clamp Bonding Bracket, which allows you to quickly snap your modules into place in seconds while bonding them together for lightning fast module install times.
Quick Folding Bend Tabs
The Bend Tab Clamps incorporated into the top of our brackets are designed to be used with our revolutionary rail-less module clamping system, but they can also be used with most all rail based systems as well. When quickly folded over with a flathead screwdriver, it clamps the solar module frame directly to the IR-F1 Rail-Less Module Flange Clamp Bonding Bracket, bonding it and locking the solar module firmly in place. For mid-row brackets, you can bend each tab in a different direction, and for end modules the tabs can both be bent the same direction for added clamping tension.
Additional Hardware (Included)
None
Mounting Requirements
(2) brackets will be required per module after the starter row.
When using our lightning fast rail-less module mounting system, (4) IR-F1 Rail-Less Module Flange Clamp Bonding Brackets will be required per module. (1) IR-F1 can be used for end clamping or (2) can me mounted (one on each side with a single carriage bolt holding them to the upright bracket) for mid clamping.
IR-F1 BRACKET SOLD SEPARATELY
