Description
The IntegraRack Super Sealing Rafter Mounted L-Foot Bracket is designed specifically for asphalt roof applications and utilizes our Super Sealing Technology.
Super Sealing Technology
This bracket is fitted with Hydro-Sealing Mastic Rubber on the bottom foot. This thick rubber will expand into the threads of the bolt and through the visual inspection holes when the proper amount of bolt pressure is applied to ensure a 100% infusion seal with the roof surface. The IR-FCSL3000 comes standard with one self piercing rafter mounting lag bolt and an EPDM sealing washer.
The leading edge of the bracket is angled downward slightly to help close the gap between the bracket and the roofs surface to prevent water from directly impacting the Hydro-Sealing Mastic Rubber seal.
Rail-Less
This bracket works with most all rail based systems, or with our own IR-FC Rail-Less Module Flange Clamp Bonding Bracket, which allows you to quickly snap your modules into place in seconds while bonding them together for lightning fast module install times.
Quick Fold Bend Tabs
The Bend Tab Clamps incorporated into the top of our brackets are designed to be used with our revolutionary rail-less module clamping system, but they can also be used with most all rail based systems as well. When quickly folded over with a flathead screwdriver, it clamps the solar module frame directly to the IR-FC Rail-Less Module Flange Clamp Bonding Bracket, bonding it and locking the solar module firmly in place. For mid-row brackets, you can bend each tab in a different direction, and for end modules the tabs can both be bent the same direction for added clamping tension.
Additional Hardware (Included)
(1) M8-1.25x60mm Flange Head Rafter Mounting Bolt with EPDM Sealing Washer
Hydro-Sealing Mastic Rubber fitted to the bottom foot of the bracket
Mounting Requirements
(2) brackets will be required per module after the starter row.
When using our lightning fast rail-less module mounting system, (4) IR-F1 Rail-Less Module Flange Clamp Bonding Brackets will be required per module. (1) IR-F1 can be used for end clamping or (2) can me mounted (one on each side with a single carriage bolt holding them to the upright bracket) for mid clamping.
IR-FC BRACKET SOLD SEPARATELY
