Description
The IntegraRack Super Sealing Rafter Mounted Extended L-Foot Bracket is designed for asphalt roof applications and utilizes our Super Sealing Technology.
Super Sealing Technology
This bracket is fitted with Hydro-Sealing Mastic Rubber on the bottom of the foot that will expand into the threads of the bolts and through the visual inspection holes when the proper amount of bolt pressure is applied to ensure 100% infusion seal with the roof surface. The Extended L-Foot comes standard with one self piercing rafter lag bolt and two self piercing deck mounting bolts with EPDM sealing washers.
The leading edge of the bracket is angled downward slightly to help close the gap between the bracket and the roofs surface to prevent water from directly impacting the Hydro-Sealing Mastic Rubber seal.
Rail-Less
This bracket works with most all rail based systems, or with our own IR-FC Rail-Less Module Flange Clamp Bonding Bracket, which allows you to quickly snap your modules into place in seconds while bonding them together for lightning fast module install times.
Additional Hardware (Included)
(2) M8-1.25x40mm Flange Head Deck Mounting Bolts with EPDM Sealing Washers
(1) M8-1.25x60mm Flange Head Rafter Mounting Lag Bolt with EPDM Sealing Washer
Hydro-Sealing Mastic Rubber fitted to the bottom foot of the bracket
Mounting Requirements
(1) IR-L1 Bracket required per module after the starter row. Meant to be placed on each corner in between modules. (2) IR-L2 Brackets can be mounted on rafters in between each IR-L3 to support modules as well.
When using our lightning fast rail-less module mounting system, (4) IR-F1 Rail-Less Module Flange Clamp Bonding Brackets will be required per module. (1) IR-F1 can be used per side for end clamping or (2) can me mounted (one on each side with a single carriage bolt holding them to the upright bracket) for mid clamping.
