IntegraRack IntegraGel™ Fast-Setting Industrial Strength Two Part Epoxy

Description

IntegraRack® IntegraGel™ Fast-Setting Industrial Strength Two Part Epoxy

IntegraGel is a fast setting non-sagging two part epoxy with a self mixing nozzle that can be used with any standard caulk gun and sets up in 30-60 minutes. The gel-like consistency of this epoxy makes it fast and easy to use as it can even be applied to vertical and overhead surfaces. This strong adhesive can be used with a variety of IntegraRack products such as the IR-T1 and IR-05.

IR-T1 TileBallast™ Solar Module Roof Mount

IntegraGel can be used to bond tiles together around each IR-T1 No Penetration TileBallast Solar Panel Roof Mount to create the ballast. Simply use a caulk gun and the included mixing nozzle to apply a bead of IntegraGel under the top and bottom tile where the tabs of the IR-T1 are to be inserted. Each tube of epoxy is enough to install ten IR-T1 roof mounts.

IR-05 BallastBase™ Flat Roof Mount (5 Degree)

While the IR-05 BallastBase Flat Roof Mount is designed to clamp around a cinder block and work as a ballasted system, it can also be installed using nothing but IntegraGel so long as the mounting surfaces have been prepped properly. The IR-05 can also be deck mounted using the IntegraGel to create a water tight seal.

*One tube of IntegraGel is good for up to five IR-05 Mounts