All Solar Products
Featured Products
- Multiple Configurations With Sun Angles From 0-30°
- Only Four Main Components
- Capable of Racking Any Size Solar Module On The Ground, Patios & Flat Roofs
- Can Be Ballasted With Standard CMU Blocks
- Can Be Mounted With Polyurethane If Ballasting Is Not An Option
- Available Wind Spoiler Integrates For Incredible Wind Resistance
- Dealer/Installer Discounts Available
$48.49-$124.99
- 15-40° Fixed Adjustable Solar Angle
- Extra 8 Inches of Ground Clearance
- Black High-Strength Composite
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-40FSAB System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Solar Modules of Any Size
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
$99.99
- 15-40° Fixed Adjustable Solar Angle
- Extra 8 Inches of Ground Clearance
- Aircraft Grade Aluminum
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-40FSAB System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Solar Modules of Any Size
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
$129.99
- Seasonal Adjustability From 15-45°
- Extra 8 Inches of Ground Clearance
- Available In Aircraft Grade Aluminum or Super Corrosion Resistant Black Zinc Plated High-Strength Steel
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-45ASAA / IR-45ASAB System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Very Large Solar Modules
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
$189.99
- 52″ Composite Pipe For Linking BallastRack Frames Together
- Replacement For 1″ Conduit Pipe
$7.99
Compatible with all BallastRack models
- Dealer/Installer Discounts Available
- With this installation method each BallastRack frame clamps to two of the 30″ EarthScrews to create a strong anchor.
- Kit includes a ratcheting wrench for easy solar panel mounting and 10 EarthScrews
- The IntegraRack EarthScrews allow for extremely fast and easy mounting with the added ability to level the system on the spikes themselves (NOT for use in silty sand or soft soil types and not recommended for rocky soil).
*SDS Max Hammer Drill and 30 inch concrete drill bit are recommended for install
$129.99
All Products
BallastRack Products
- Fixed 15° Sun Angle With 0° Hurricane Setting
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-15 System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Solar Modules of Any Size
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
- High-Strength Engineering
- Aircraft Grade Aluminum and Zinc Plated Steel
$119.99
- Fixed 30° Sun Angle
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-30 System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Solar Modules of Any Size
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
- High-Strength Engineering
- Aircraft Grade Aluminum and Zinc Plated Steel
$119.99
- Fixed 45° Sun Angle
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-45 System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Solar Modules of Any Size
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
- High-Strength Engineering
- Aircraft Grade Aluminum and Zinc Plated Steel
$144.99
- 15-40° Fixed Adjustable Solar Angle
- Extra 8 Inches of Ground Clearance
- Aircraft Grade Aluminum
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-40FSAB System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Solar Modules of Any Size
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
$129.99
- 15-40° Fixed Adjustable Sun Angle
- Extra 8 Inches of Ground Clearance
- Super Corrosion Resistant Black Zinc Plated High-Strength Steel
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-40FSAB System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Solar Modules of Any Size
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
$129.99
- 15-40° Fixed Adjustable Solar Angle
- Extra 8 Inches of Ground Clearance
- Black High-Strength Composite
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-40FSAB System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Solar Modules of Any Size
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
$99.99
- Seasonal Adjustability From 15-45°
- Extra 8 Inches of Ground Clearance
- Available In Aircraft Grade Aluminum or Super Corrosion Resistant Black Zinc Plated High-Strength Steel
- Dealer/Installer Discounts Available
- Start a New Row / Add One Panel to Existing IR-45ASAB System
- 6x Faster Than Traditional Ground Mount Systems
- Capable of Racking Very Large Solar Modules
- Lowest Cost Per Watt
- No Concrete Footings, No Earth Augers, No Post Pounding Required
- Multiple Mounting Options
$189.99
- 52″ Composite Pipe For Linking BallastRack Frames Together
- Replacement For 1″ Conduit Pipe
$7.99
BallastRack™ Mounting Kits
These mounting kits are not required, but do offer easy mounting solutions for any of the IntegraRack BallastRack frames listed above. Only one type of kit is needed per system and each one is capable of mounting a set number of BallastRack frames. Each BallastRack Mounting Kit includes one ratchet wrench that allows for fast and easy panel mounting. Please refer to IntegraRack’s Stamped Engineering & Datasheets to see which mounting option is best for you.
Compatible with all BallastRack models
- Dealer/Installer Discounts Available
- With this installation method each BallastRack frame clamps to two of the 30″ EarthScrews to create a strong anchor.
- Kit includes a ratcheting wrench for easy solar panel mounting and 10 EarthScrews
- The IntegraRack EarthScrews allow for extremely fast and easy mounting with the added ability to level the system on the spikes themselves (NOT for use in silty sand or soft soil types and not recommended for rocky soil).
*SDS Max Hammer Drill and 30 inch concrete drill bit are recommended for install
$129.99
Compatible with all BallastRack models
- Dealer/Installer Discounts Available
- Uses a fast-setting epoxy to adhere geotextile material to the BallastRack frames and earth fill over for a very strong and fast ballasted system.
- Kit incudes a 50 ft. roll of strong geotextile material, a strong epoxy with mixing nozzle, a ratchetting wrench, and everything needed to prep the frames.
- Provides easy mounting in locations where ground penetration is not possible, with incredible strength against high wind speeds.
- Capable of ballasting up to 12 BallastRack frames (based on 46 inch wide panel).
$89.99
Compatible with all BallastRack models
- Dealer/Installer Discounts Available
- With this installation method each BallastRack frame clamps to two AnchorSpikes with a two part epoxy to create a strong anchor.
- Kit includes a ratcheting wrench, 10 IR AnchorSpikes and a full two part epoxy kit to mount up to 5 frames almost anywhere.
- The IntegraRack AnchorSpikes allow for extremely fast and easy mounting with the added ability to level the system on the spikes themselves (not recommended for use in rocky soil or loose sand).
*SDS Hammer Drill and 30 inch concrete drill bit are recommended for install
$144.99
Compatible with all BallastRack models
- Dealer/Installer Discounts Available
- With this installation method each BallastRack frame clamps to two AnchorSpikes with a two part epoxy to create a strong anchor.
- Kit includes a ratcheting wrench, 22 IR AnchorSpikes and a full two part epoxy kit to mount up to 11 frames almost anywhere.
- The IntegraRack AnchorSpikes allow for extremely fast and easy mounting with the added ability to level the system on the spikes themselves (not recommended for use in rocky soil or loose sand).
*SDS Hammer Drill and 30 inch concrete drill bit are recommended for install
$299.99
Compatible with all BallastRack models
- Dealer/Installer Discounts Available
- Kit Includes a ratcheting wrench for mounting panels, 22 concrete lag bolts, 44 washers and 2 concrete drill bits for mounting frames up to 11 frames to almost any concrete surface.
- Perfect for mounting to pre-existing concrete pads/patios (on-site engineering may be required by county) or newly poured concrete slabs/footings.
$59.99
MultiBallast Products
$48.49
- 5° East/West ‘W’ Configuration (Optional 0° Flat Configuration)
- Dealer/Installer Discounts Available
- Capable of Racking Any Size Solar Panel
- Solar Panel Clamps Included
- Uses Standard CMU Block For Ballasting
- Optional Polyurethane Direct Bond Mounting
- For Flat Roof or Ground Mounting
- 8° South Configuration
- Dealer/Installer Discounts Available
- Capable of Racking Any Size Solar Panel
- Solar Panel Clamps Included
- Integrated Wind Spoiler (Sold Separately)
- Uses Standard CMU Block For Ballasting
- Optional Polyurethane Direct Bond Mounting
- For Flat Roof or Ground Mounting
$59.99
- 13° South Configuration
- Dealer/Installer Discounts Available
- Capable of Racking Any Size Solar Panel
- Solar Panel Clamps Included
- Integrated Wind Spoiler (Sold Separately)
- Uses Standard CMU Block For Ballasting
- Optional Polyurethane Direct Bond Mounting
- For Flat Roof or Ground Mounting
$91.99
- 20-30° South Configuration
- Dealer/Installer Discounts Available
- Capable of Racking Any Size Solar Panel
- Solar Panel Clamps Included
- Integrated Wind Spoiler (Sold Separately)
- Uses Standard CMU Block For Ballasting
- Optional Polyurethane Direct Bond Mounting
- For Flat Roof or Ground Mounting
$124.99
- Ten 62″ Long Wind Spoilers
- Dealer/Installer Discounts Available
- Integrate Seamlessly With The MultiBallast System
- Blocks Wind From Getting Underneath Solar Panels
- Creates Downforce For The System
$169.99
TileBallast Products
- Aeronautical Wind Tunnel Tested at 165 MPH With a 3:1 Safety Factor
- Dealer/Installer Discounts Available
- Kit Includes Ten IR-T1 Mounts
- No Tile Removal, No Roof Penetration
- 4x Faster Than Traditional Tile Roof Hooks
- New Design For Even Faster Mounting
- Fits Wider Range of Roof Tiles
- For Use With All Rail Systems
- Rated for Almost 200lbs of Direct Uplift Per Mount
$129.99
- Aeronautical Wind Tunnel Tested at 165 MPH With a 3:1 Safety Factor
- Dealer/Installer Discounts Available
- No Tile Removal, No Roof Penetration
- 4x Faster Than Traditional Tile Roof Hooks
- New Design For Even Faster Mounting
- Fits Wider Range of Roof Tiles
- For Use With All Rail Systems
- Rated for Almost 200lbs of Direct Uplift Per Mount
$14.65
Accessories
- Dealer/Installer Discounts Available
- High-Strength Tested
- For Use With IR-T1 & IR-05
- Non-Sagging
- Fast Setting
- Self Mixing Nozzle Included
$22.50
- Dealer/Installer Discounts Available
- Rail-Less Solar Panel Mounting
- Integrated Bonding
- For Use With IntegraRack IR-05 Flat Roof Ballast System & BallastRack Frames
$3.75
- Dealer/Installer Discounts Available
- Used for Bonding Between Rows of Solar Panels
- 8 Inch and 12 Inch Models Available
$3.99 – $4.99
integrarack integra rack integrated racking integrity racking solar power distribution distributors pv photovoltaic solar battery eg4 brightmount bright mount large scale utility scale solar farm mico grid micro-grid sun energy free electricity solar power retail store solar power retailer solar sun power solar installation diy do it yourself off-grid off grid cabin solar energy independent free energy green energy clean energy best solar products no penetration non invasive no leak tile roof solar mount rack frame solar panel module utility scale large scale project technology easiest fastest cheapest lowest price budget friendly free shipping global shipping powerrack power rack tamerack snap n rack ironridge iron ridge unirack ced green tech tileballast will prowse solar guy solar experts installation easy easiest user friendly ballastrack ir-15 ir-30 ir-45 ir-35a ir-45asa seasonal solar seasonally adjustable solar high output solar made in usa american made high-grade aircraft-grade aluminum stainless steel zinc plated ir-t1 ir-f2 ir-05 15 degree sun angle 30 degree sun angle 45 degree sun angle 35 degree sun angle adjustable angle las vegas united states nevada california florida utah arizona ul2073 listed ul listed florida approved hurricane proof california approved wind tunnel tested
